"Terp slurpers are one of the categories I get the most questions about — because they look complicated and most buyers have no idea what they're actually paying for. I started Stoned Genie in 2017 sourcing borosilicate and quartz glass directly from manufacturers, so before you scroll through the products below, let me walk you through what makes a terp slurper worth buying and how to tell a well-made one from a cheap knockoff."
— Rahul Lavingia, Founder & Owner, StonedGenie.com | Riverside, CA | Selling glass since 2017
What Is a Terp Slurper, Exactly?
A terp slurper is a quartz banger built specifically for low-temperature dabbing. Unlike a standard bucket banger, it has a narrow, tube-like neck that drops into a lower dish lined with airflow slits. When you load a dab and cap it, the vapor pressure pulls your concentrate down through that neck and into the dish in a swirling, slurping motion — hence the name. That constant recirculation means the oil never sits in one hot spot long enough to scorch, which is the whole point.
If you're still building out your dab setup, browse our full dab accessories collection for bangers, carb caps, and terp pearls — everything a terp slurper pairs with. And if you're looking for a complete rig to pair with one, our dab rig collection covers every style and budget.
What We Look for When Sourcing Terp Slurpers
Cheap terp slurpers usually fail on weld quality first — you'll see a visible seam where the neck meets the dish, and that's where they crack after a few weeks of use. Here's the standard every piece in this collection is held to:
Neck-to-Dish Ratio
The middle cylinder needs to be narrow enough to create real vortex pull — not just decorative slits that look good in photos but don't do anything for airflow.
Full Weld Quality
A fully welded joint between the neck and dish means no weak seams that crack under repeated torching. Our fully welded options are built specifically to outlast cheaper alternatives.
Slit Count and Placement
Four evenly spaced airflow slits at the base of the dish is the standard — fewer than that and heat distributes unevenly, which defeats the purpose of the design.
Joint Angle and Gauge
A 90-degree joint with true 14mm or 18mm gauge glass so it seats properly in your rig without wobble. Sizing is listed on every product page.
Terp Slurpers We Carry
Five options across two joint sizes and three build levels — hand-selected by Rahul, factory-direct pricing, and built to the weld and slit standards above.
14mm Thick Terp Slurper Quartz Banger
Our standard-gauge option — built for most mini and mid-size dab rigs. Thick quartz walls, four evenly spaced airflow slits, and a clean weld between neck and dish. The right starting point for most dabbers making the switch from a standard banger.
For Larger Rigs18mm Thick Terp Slurper Quartz Banger
Heavier gauge for larger rigs and dabbers who run bigger loads. Same thick quartz construction and four-slit airflow design as the 14mm — scaled up for rigs with an 18mm joint. Check your rig's joint size before ordering.
Most DurableFully Welded Terp Slurper
No seam between neck and dish — our most durable build. If cracking at the joint has been a problem with cheaper terp slurpers you've owned before, this is the upgrade that solves it. Fully welded construction handles repeated torching without the stress fractures that plague seamed alternatives.
Best Carb Cap SealFully Welded + Beveled Edge Terp Slurper
Same full weld integrity as the standard fully welded model, with a beveled rim added for cleaner carb cap seating. If you're running a directional or flat carb cap, the beveled edge creates a noticeably tighter seal — which is what allows the vortex effect to work at its best.
Complete KitTerp Slurper Marble Set Combo
The banger paired with terp pearls, ready to use out of the box. If you're setting up a terp slurper for the first time and want the full low-temp dabbing experience from session one, this is the pick — the marbles and pearls do the spinning work that distributes concentrate evenly across the dish.
Why Dabbers Are Switching to Terp Slurpers
🌿 Terpene Preservation
Terpenes start breaking down well before 500°F. A terp slurper's design lets you dab effectively at lower temperatures than a standard banger, which means you're actually tasting the strain instead of burning it off.
💧 Less Waste
Because concentrate keeps recirculating through the dish instead of pooling and scorching in one spot, more of what you load actually vaporizes instead of turning into reclaim you scrape out later.
🫁 Lower Combustion Byproducts
Dabbing at lower temperatures reduces the production of benzene and other combustion byproducts that appear when quartz gets torched too hot. If you're dabbing daily, that difference matters over time.
💨 Bigger Dabs Without Waste
The dish geometry handles a larger load than a standard banger without flooding — useful if you're sharing a rig or simply prefer bigger hits without watching concentrate pool and burn in one spot.
Anatomy of a Terp Slurper
Three sections do the work — and understanding what each one does is what separates a dabber who gets the most out of this design from one who's frustrated by it:
Top Opening
Wide enough that concentrate swirling back up doesn't clog the neck. This is where you load and where your carb cap sits.
Middle Cylinder
Narrow, with angled slits that pull the dab into a vortex as vapor pressure builds. The narrower this is, the stronger the pull.
Lower Dish
Where the concentrate actually melts and vaporizes through the base slits. This is what separates a terp slurper from a standard bucket banger.
"I've been sourcing glass directly from manufacturers since 2017, cutting out the head-shop markup that inflates prices on quartz this thick. Every terp slurper in this collection ships from our warehouse in Riverside, CA. Questions about sizing, weld type, or compatibility with your rig — email me directly at care@stonedgenie.com and I'll get back to you."
— Rahul Lavingia, StonedGenie.comHow to Use a Terp Slurper
The technique is slightly different from a standard banger — here's how to get the most out of the design:
-
1
Start Clean Rig, banger, and dab tool wiped down before you start. Residue buildup is the number one cause of uneven heating in a terp slurper — more surface area means more places for old oil to interfere.
-
2
Heat the Dish, Not Just the Neck Apply your torch to the dish section more than the neck. Even heat matters more here than with a standard banger — you want the whole lower section warm, not just the top.
-
3
Let It Cool to Your Target Range Terp slurpers are built for low-temp dabbing — resist the urge to torch it glowing hot. Let it rest for 30–45 seconds after heating, targeting 450–600°F at the dish.
-
4
Load Into the Dish Place your concentrate directly into the dish using your dab tool — not onto the neck. The dish is where vaporization happens.
-
5
Cap and Inhale Slow Cap with a carb cap or terp pearls and inhale slowly — the vortex effect works best with steady, controlled airflow. Pulling too hard disrupts the recirculation pattern.
Keeping Your Terp Slurper Clean
Terp slurpers hold onto reclaim more than standard bangers because of the extra surface area — so cleaning after every session matters more here, not less:
Pull Pearls While Still Warm
Not hot — warm. Drop them straight into isopropyl alcohol to keep them from cracking and to loosen residue before it hardens inside the pearl.
Swab the Dish and Neck Immediately
Use a cotton swab dipped in alcohol before residue hardens. Letting it sit is how you get chazzing — that permanent discoloration that makes a banger look burnt even when it's clean.
Full Alcohol-and-Salt Soak Weekly
For daily dabbers, a weekly full soak in isopropyl alcohol and coarse salt prevents buildup from accumulating in the slits and dish where swabs can't fully reach.
Never Use Abrasive Tools
The slits in the lower dish are precisely placed — scratching them with abrasive cleaners disrupts airflow. Cotton swabs and alcohol only inside the quartz.
Complete Your Dab Setup
A terp slurper works best as part of a properly matched setup. Here's everything else you need:
Bangers, terp pearls, reclaim catchers, and everything else in the collection.
Carb CapsDirectional and bubble carb caps for lower-temp dabs and the vortex effect.
Dab TorchesButane torches with adjustable flame for consistent, controllable heat.
Dab RigsOur full collection of dab rigs — compact mini rigs to full-size recyclers.
Cheap Dab RigsQuality dab rigs under $50. Factory-direct pricing, no boutique markup.
Frequently Asked Questions
What's the difference between a terp slurper and a regular quartz banger?
A regular banger is a bucket-shaped dish — concentrate sits in it, vaporizes, and that's it. A terp slurper adds a narrow neck and a slitted lower dish that pulls concentrate into a recirculating vortex so it vaporizes more evenly at lower temperatures. The result is better terpene preservation, less waste, and a noticeably richer flavor. Browse our full dab accessories collection to compare banger styles.
What temperature should I run a terp slurper at?
Terp slurpers are built for low-temp dabbing, generally in the 450–600°F range measured at the dish. Heat with your torch, let it rest for 30–45 seconds, then dab — you're aiming for the concentrate to melt and swirl, not scorch on contact. A carb cap is essential for maintaining the pressure that makes the low-temp vortex work.
Do I need terp pearls to use a terp slurper?
No, but they help significantly. Pearls spin inside the dish and spread concentrate evenly across the heated surface, which improves vaporization and reduces waste. You can run a terp slurper without them using just a carb cap — our Terp Slurper Marble Set Combo includes everything you need to experience the full low-temp setup from day one.
Why does my terp slurper keep cracking at the neck?
That's almost always a weld issue. If the neck was glued or fused rather than fully welded to the dish, repeated torching stresses that seam until it fails. Our Fully Welded Terp Slurper and Fully Welded Beveled Edge options are built specifically to solve this — no seam between neck and dish means no weak point to fail under heat.
What size terp slurper fits my rig?
Match the joint gauge — most mini and mid-size rigs take 14mm, larger rigs take 18mm. Check your rig's joint size before ordering. Our 14mm Thick Terp Slurper fits the majority of standard dab rigs; the 18mm option is built for larger setups. If you're unsure, email us at care@stonedgenie.com and we'll help you confirm compatibility.
What's the advantage of a beveled edge terp slurper?
The beveled rim on our Fully Welded Beveled Edge Terp Slurper creates a tighter seal when a flat or directional carb cap sits on top. A better seal means better pressure control inside the banger, which is what allows the vortex effect to work at its best. If you're running a precision carb cap setup, the beveled edge is the upgrade worth making.
Do you ship terp slurpers internationally?
Yes — we ship worldwide from our Riverside, CA warehouse and have been doing so since 2017. Domestic US orders over $125 qualify for free shipping. International shipping rates are calculated at checkout based on destination and package weight. For questions about compatibility or your specific location, reach out at care@stonedgenie.com.
Buy Terp Slurpers Wholesale
Since 2017, Stoned Genie has been a trusted wholesale partner for smoke shops and head shops around the world. Terp slurpers are a high-demand SKU in any shop that carries dab accessories — the low-temp dabbing trend has made them one of the fastest-growing categories in the concentrate accessory market, and customers who try them rarely go back to standard bangers.
We offer competitive wholesale pricing across our full terp slurper lineup — 14mm, 18mm, fully welded, beveled edge, and the marble set combo. Factory-direct sourcing means strong margins for your business without the distributor markup.
Learn About Wholesale →
